User guide

Page 3-6 P/N. 11016-001 Rev. January 7, 2005
User Guide
AutoPulse™ Resuscitation System Model 100
Figure 3-7 Aligning the LifeBand Chest Bands
8. Close the LifeBand chest bands around the patient's chest.
Note: AED or defibrillation pads are not components of the AutoPulse System.
To properly align the bands:
a) Place band
➊ on top of patient’s chest (see Figure 3-7).
b) Locate mating slot of band
➋ over the alignment tab ➊ (see Figure 3-7).
c) Press the bands together to engage and secure the Velcro
®
fastener (see Figure 3-8).
Caution: Make sure that the bands are not twisted before automatic compressions begin.
Note: If the bands cannot be closed, use manual CPR.
LifeBand
Alignment Slot
Band 2
Band 1
LifeBand
Alignment Tab