User guide

P/N. 11016-001 Rev. January 7, 2005 Page 2-11
User Guide
AutoPulse™ Resuscitation System Model 100
Figure 2-11 Ventilation Tones menu
The “Set Vent Tones” menu item allows you to enable or disable the audible tone sequence that is used
to cue the ventilation phase in the 15:2 compression mode and to sound a ventilation cue during the 6
th
of each set of 7 compressions during continuous mode. Highlight the desired setting using the Move Up
and Down arrow buttons, press the Select Choice Button to select it (a check will appear beside the
selected item) and then press the gray Menu/Mode switch button under the word “back” to return to the
main Administrative Menu.
Note: If the ventilation tone is disabled here it cannot be re-enabled, during operation, by using the
Tone Silence button (refer to section Section 1.4.2.6, “Tone Silence Button,” on page 1-7).