User guide

Page 2-4 P/N. 11016-001 Rev. January 7, 2005
User Guide
AutoPulse™ Resuscitation System Model 100
9. Turn the AutoPulse Platform over and press the ON/OFF button to power it up. If the User Control
Panel reports a user advisory, check the installation of the LifeBand band clip into the slot in the
drive shaft.
2.1.2 Removing the LifeBand CCA
1. Place the AutoPulse Platform with the patient surface facing down on a smooth, flat surface.
2. Flip up the hinged skirts of the LifeBand cover plate to disengage the LifeBand chest bands from
the rollers (see Figure 2-5). You will hear the skirt “snap.” This is normal.
Figure 2-5 Flip Up the Hinged Skirts of the LifeBand CCA
LifeBand Cover Plate
Skirt