User guide
P/N. 11016-001 Rev. January 7, 2005 Page 1-3
User Guide
AutoPulse™ Resuscitation System Model 100
Figure 1-2 AutoPulse Platform (Patient and Back Surfaces)
1.3.2 LifeBand™ Chest Compression Assembly (CCA)
The LifeBand CCA consists of a cover plate and two bands integrated with a compression pad with a
Velcro
®
fastener. Attached to the AutoPulse Platform, the LifeBand CCA is automatically adjusted to the
patient by the AutoPulse Platform and provides compressions to the patient's chest in the region of the
heart. The LifeBand CCA is a single-use component that is attached to the AutoPulse Platform before
each use.
The latex-free LifeBand CCA is for single-patient use only.
1.3.3 AutoPulse Power System Battery
The AutoPulse Power System Battery (also known as the Battery) is a removable component that
supplies power for the AutoPulse Platform operation. The Battery is a proprietary, rechargeable, nickel-
metal hydride (NiMH) battery that is the exclusive power source for the AutoPulse Platform.
The Battery is mechanically keyed to the AutoPulse Platform and Battery Charger to facilitate correct
installation. The Battery’s back end contains connections for power and communications to the Battery
Charger and to the AutoPulse Platform. A Battery Status Check button illuminates the Battery’s status
light-emitting diodes (LEDs).
For more information on the Battery, refer to the AutoPulse Power System User Guide.
P
O
W
E
R
Cooling Vent
Cooling Vent
LifeBand
Roller Guide
AutoPulse
Slotted Drive Shaft
Battery
ON/OFF Button
User Control Panel
Start/Continue Button
Stop/Cancel Button
Carry Handle
Patient Alignment
Reference
Patient Surface
Back Surface