Operation Manual

4.2.2 Erase Codes

1) Select , the screen will display the interface as shown below.Erase Codes

2) According to the above figure to select different item by pressing orUP DOWN

and press to confirm.ENTER

Current DTC

P0135

1/12

O2 Sensor Heater Circuit Bank 1 Sensor 1

3) You can use key to view the next code.DOWN

After viewing all the codes, you can press to return to the DiagnosticEXIT

menu.

Press to erase DTC's, and the screen will display the interface as shownENTER

below:

Erase DTC

Please Tum Ignition ON with Engine Off Press

Enter key to continue!

Erase DTC

Clear/Reset Emission-Related Diagnostic

Information, Are You sure?

2) According to the above figure to press and the screen will display theENTER

interface as shown on the next page:

Erase DTC

Emission-Related Diagnostic Information have been

Cleared!