Operation Manual

The purpose of the I/M Readiness Monitor Status is to indicate which of

the vehicle's Monitors have run and completed their diagnosis and

testing (as described in 2.5), and which ones have not yet run and

completed testing and diagnosis of their designated sections of the

vehicle's emissions system.

The I/M Readiness Monitor Status function also can be used (after repair

of a fault has been performed) to confirm that the repair has been

performed correctly, and/or to check for Monitor Run Status.

Select [I/M Readiness Test] and Press [ENTER], the screen will display

the interface as shown below:

Press EXIT return to the Diagnostic Menu.

4.6 Current Trip Info.

This Function can display some Information about the current trip. The

following information can be displayed:

1. Fuel Consumption

2. Fuel Economy

3. AVG Economy

4. Fuel Used

5. Speed

6. AVG Speed

7. Distance

8. Running Time

Do not try to make any adjustment While driving.

Do not route the cable in a manner which would interfere with the operation

of the vehicle controls.

Note:

When first use this function you should setup the Fuel type and Engine

liter of your vehicle. (in System Setup menu)