Operation Manual

2) A warning message comes up asking for your confirmation.

3) Press ENTER to confirm.

If the codes are cleared successfully, an "Erase Done!" confirmation

message is displayed.

If the codes are not cleared, then an "Erase Failure. Turn Key on with

Engine off!" message is displayed.

4.3 View Data Stream

The OBD II Scan Tool is a special diagnostic tool that communicates

with the vehicle's computer. The Scan Tool lets you view "real-time"

Live Data. This information includes values (volts, rpm, temperature,

and actuators.

system status, etc.) generated by the various vehicle sensors, switches

speed etc.) and system status information (open loop, closed loop, fuel