Operation Manual

2) From the Contrast menu, use the UP/DOWN scroll button to increase or

decrease contrast.

3) Press ENTER to save your settings and return to the previous menu.

Unit of Measure

Metric is the default measurement unit.

1) From the System Setup menu, use the UP/DOWN scroll button to select Unit

of Measure and press ENTER.

2) From the Unit of Measure menu, use the UP/DOWN scroll button to select the

desired Unit of Measure.

3) Press the ENTER button to save your selection and return to the previous

menu.

3) Press the ENTER button to save your selection and return to the previous

menu.