Operation Manual

2) From the Code Lookup menu, use the LEFT/RIGHT button to move to the
desired character, use the UP/DOWN button to change the selected digit/
character and press the ENTER button to confirm.
3) View the DTC definition on screen. Wh en the DTC definition covers mo re than
one screen, use the LEFT/RIGHT button to view additional information on
previous/next screen(s).
For manufacturer specific codes, you'll need to select a vehicle make
on an additional screen to look for DTC definitions.
If definition could not be found (SAE or Manufacturer Specific), the scan
tool displays "DTC definition not found! Please refer to vehicle service"
manual!"
4) To exit to the Main Menu, press the EXIT button.
3.5 System Setup
The scan tool allows you to make the following adjustments and settings:
1) Select Language: Selects the desired language.
2) Adjust Contrast: Adjusts the contrast of the LCD display.
3) Unit of Measure: Sets the unit of measure to English or Metric.
4) Fuel Type: Select vehicle Fuel Type.
5) Engine Liter: Setup up vehicle engine liter.
6) Beep Set: Turns ON/OFF beep.
To enter the setup menu mode
From the keyboard: Press the EXIT button to enter the System Setup
menu. Follow the instructions to make adjustments and program settings
as described in the following setup options.
11