Operation Manual

13
Pending Codes are also referred to as "maturing codes" or "continuous
monitor codes". They indicate problems that the control module has
detected during the current or last driving cycle, but are not considered
serious, yet. Pending Codes will not turn on the malfunction indicator
serious, yet. Pending Codes will not turn on the malfunction indicator up
cycles, the code clears from memory.
If there are no Diagnostic Trouble Codes present, the display indicates
"No (pending) codes are stored in the module!" Wait a few seconds or
press any key to return to the Diagnostic Menu.
1) Use the UP/DOWN scroll button to select Read Codes from the Diagnostic
Menu and press ENTER.
2) Use the UP/DOWN scroll button to select Stored Codes or Pending Codes
from the Trouble Codes menu and press ENTER.
3) View DTCs and their definitions on screen.
Diagnostic Menu
Er a se C ode s
Live D a ta
Vi e w F ree z e F ra m e
I/M R e a d in e s s
R e a d C od e s
Vehicle Info.
Trouble Codes
Pe n d i n g C o d e s
S t o r e d C o d e s