Specifications

Executing Switches
A switch is an active connection between an input (source) device and one or
more output (destination) devices. The signals routed in a switching operation are
individual signals or groups of individual signals coming through the connectors
on the rear of an enclosure. Executing a preset is a quick way to execute multiple
switches at a time. For information on presets, see page 5-1.
Switches are executed on the default virtual matrix unless otherwise specified.
When specifying a virtual matrix, be sure it includes all the signals you want to
route. The number of the virtual matrix (VM) that operations are currently being
performed on is displayed in the upper-right of the display. If you need to change
the virtual matrix, see “Changing the Virtual Matrix” on page 2-7.
You can return to the Main Menu screen at any time by pressing the Function
key.
Note: In each switch command, you can enter multiple output signals, but only
one input signal. However, you must select the input first in order to select
multiple outputs. The Take key must be pressed for the switch operation to
execute.
CP-20A Control Panel Operation 2-1
Executing Switches