Specifications

CP-20A Control Panel
A CP-20A Control Panel has a graphic LCD with a dynamic menu area,
dynamic menu keys, a Function key, and a Take key.
Graphic LCD
An LCD with a backlight displays instructions and selection entry fields. The
backlight automatically turns off after 15 minutes of inactivity. Press any key
to reactivate the light.
Note: To adjust the contrast of the LCD, see Chapter 7, “Adjusting LCD
Contrast.”
Dynamic Menu Area
The menu displays different command options across the bottom of the LCD,
depending on which screen is active. These options can be accessed using the
corresponding dynamic menu keys. The menu options are multilevel with the
ability to display custom input (source) and output (destination) names (labels).
The default channel name (e.g., O_Ch:0003 for Output 3) appears unless the
name has been modified in the configuration file* using X
N
Connect (see
Chapter 8 of the Installation & Setup section of this binder).
* The configuration file (.xcl file) contains routing and control information for
a system and is modified with X
N
Connect, which graphically displays the file.
Both the configuration file and X
N
Connect are on the AutoPatch Software &
Documentation CD.
1-2 CP-20A Control Panel Operation
Introducing the CP-20A
Introduction
Graphic LCD
Dynamic Menu Keys
Dynamic Menu Area
Take Key
Function Key
Power Indicator (or LED System Indicators)
Figure 2: Close-up view of a CP-20A Control Panel