Specifications

Introducing the CP-20A
This section is specifically written for AutoPatch enclosures with either a front or
remote CP-20A Control Panel. The CP-20A is used for controlling the system’s
switches and system attributes. Although control panels are optional, we
recommend one per system for system verification, redundant control, and
troubleshooting.
Figure 1 illustrates an Optima Distribution Matrix with a CP-20A Control Panel.
Other models may vary slightly in appearance.
Note: AutoPatch enclosures can also be controlled using BCS (Basic Control
Structure) commands transmitted through an external controller; see the BCS
Serial Control Protocol or Serial Control Operation section of this binder.
AutoPatch control software can also be used to control an AutoPatch system;
see the AutoPatch Software & Documentation CD for more information.
CP-20A Control Panel Operation 1-1
Introduction
Figure 1: Front view of an Optima with a CP-20A Control Panel