Specifications

Verifying Signal Status
Signal status can be verified to confirm that a switch has executed properly or to
confirm correct routing to multiple outputs. Input status and output status both
function on the CP-20A Control Panel. An output can only be connected to one
input; therefore, verifying the status of an output will display only the one input
it is currently connected to.
You can return to the Main Menu screen at any time by pressing the Function
key.
If you need to change the virtual matrix, see “Changing the Virtual Matrix” on
page 2-7.
Verifying Input Status
The example below verifies the signal status for Input 31: Main Mic Mtg Rm B
on Virtual Matrix 0.
Note: If you choose to check the status of an input, all the outputs that are
connected to it will be listed.
To verify the signal status of an input:
1. At the Main Menu screen, choose the Status command.
If the Status command is not available, press the Function key to view
additional Main Menu options.
CP-20A Control Panel Operation 4-1
Verifying
Signal Status
CHANGE STATUS DISC AUDIO
High Performance
Signal Routing