Specifications

Disconnecting Switches
Disconnecting a switch deactivates the connection between an input (source)
signal and one or more output (destination) devices. Disconnecting an input
disconnects all outputs receiving that source signal. You can disconnect a switch
by selecting either inputs or outputs from the CP-20A Control Panel.
You can return to the Main Menu screen at any time by pressing the Function
key.
If you need to change the virtual matrix, see “Changing the Virtual Matrix” on
page 2-7.
Note: You can select multiple inputs or outputs by scrolling through the list and
pressing the Select key. The Select key functions as a toggle switch, selecting
and unselecting inputs or outputs in the list each time it is pressed. The Take key
must be pressed for the disconnect operation to execute.
CP-20A Control Panel Operation 3-1
Disconnecting
Switches