Specifications

7. Press the Take key to execute the operation.
The switch to Output
15: Main Monitor Rm B from Input
10: DVD #1 Control Rm occurs as soon as the Take key is pressed.
The system returns to the Change Output screen.
8. Make additional switches.
Or press the Function key to return to the Main Menu screen.
Changing the Virtual Matrix
Virtual matrices are defined in X
N
Connect and stored in the system’s
configuration file (see the X
N
Connect Help file). Systems usually have a virtual
matrix that contains all signals, so that any input can be routed to any or all
outputs. The same system may have other VMs that switch only audio signals or
only video signals.
Occasionally you may need to execute switches (or other operations) on a virtual
matrix other than the current virtual matrix. Changing the virtual matrix does not
change the default virtual matrix. The system will revert to switching on the
default virtual matrix when the power is cycled.
The example below gives the steps for changing from routing signals on the
“Audio follow Video,” virtual matrix, to routing on the “Audio, Stereo” virtual
matrix that switches only audio signals. Although this example accesses the VM
(Virtual Matrix) option from the Change menu, this option can be selected from
most of the command menus found along the bottom of the screen.
To change the virtual matrix:
1. At the Main Menu screen, choose the Change command.
If the Change command is not available, press the Function key to view
additional Main Menu options.
CP-20A Control Panel Operation 2-7
Changing the Virtual Matrix
Executing Switches
CHANGE STATUS DISC AUDIO
High Performance
Signal Routing