Specifications

Note: You can select multiple outputs by scrolling through the list and pressing
the Select key. The Select key functions as a toggle switch, selecting and
unselecting outputs in the list each time it is pressed. Any outputs that are already
routed to the selected input are highlighted. Unselecting an output(s) results in its
disconnection when the Take key is pressed.
6. Press the Take key to execute the operation.
The switch from Input
33: Satellite Dish to Output
6: Reception Monitor occurs as soon as the Take key is pressed.
The system returns to the Change Input screen.
7. Make additional switches.
Or press the Function key to return to the Main Menu screen.
Executing Switches – Selecting Output First
You can execute a switch by selecting one output first; however, to select
multiple outputs you must use the “Selecting Input First” method (see page 2-2).
The example below routes a signal to Output
15: Main Monitor Rm B from
Input
10: DVD #1 Control Rm on Virtual Matrix 0.
To execute a switch:
1. At the Main Menu screen, choose the Change command.
If the Change command is not available, press the Function key to view
additional Main Menu options.
2-4 CP-20A Control Panel Operation
Executing Switches
Executing Switches
CHANGE STATUS DISC AUDIO
High Performance
Signal Routing