Setup guide

Index
A
AC line conditioner 6-1
AC power B-1
adding boards
see hardware, adding
adding enclosures
see hardware, adding
adjusting Volume 8-2 to 8-8
absolute method 8-6
increment/decrement method 8-8
relative method 8-7
with CP-20MD Control Panel, illus.
8-2 to 8-4
with BCS (Basic Control Structure)
commands 8-5 to 8-8
applying power
see startup
audio
attaching, illus. 4-3
balanced and unbalanced connections,
illus. 4-3
board specifications B-2 to B-3
standard B-2
volume control B-2
AutoAssist vi
B
Basic Control Structure
see BCS
BAUD rate settings 5-2
BCS (Basic Control Structure)
adjusting volume 8-5 to 8-8
BCS (Basic Control Structure) (continued)
command characters (keys) C-2
definition iv
test switch 7-7
boards
see inputs and outputs
buttons (keys)
see CP-10MD Control Panel
see CP-20MD Control Panel
C
cable
attaching 4-2, 10-4
link 2-3, 3-2 to 3-5, 10-8
serial ii
signal 4-2
sync 10-6
Caution
Double Pole/Neutral Fusing 1-7
heat producing equipment 2-2
overheating 2-1
power switches, turning on 2-2
presets, disconnecting an input 9-9
Central Processing Unit
see CPU
chapter descriptions iii
checking Volume status 8-9
Clear Labels command, CP-20MD 9-5 to
9-6
Command screen 1-5, 6-2
see also CP-10MD Control Panel
see also LCD screen
Installation and Setup Guide