Setup guide

CP-20MD Control Panel
An optional panel on the front of the enclosure with a graphic LCD that
uses keys and a dial for entering commands. The menu options are
multilevel with the ability to display custom source and destination
descriptions defined by the configuration file.
CP-10MD Control Panel
An optional panel on the front of the enclosure with an LCD screen and
keys for entering commands. The CP-10MD Control Panel is designed
for system control of the Modula Distribution Matrix.
CPU (Central Processing Unit)
Receives, interprets, and executes commands from the user through the
user interface (the local control panel or other control device).
D
Distribution Matrix
(see matrix switcher)
E
Enclosure
The metal chassis that holds input and output boards, a CPU board, and a
power supply.
ESD (Electrostatic Discharge)
Electrical charges (such as static electricity) that can damage sensitive
components inside an enclosure. ESD damage can occur if you are not
properly grounded and not handling components correctly (see the
Caution page inside the front cover of this manual for more details about
ESD).
Expansion Slots
Two empty slots on the rear of an enclosure that allow for future boards
that will increase functionality and add new features to the system. One
is located to the right of the power supply and one to the left of the CPU
board.
External Controller
Any device that can control the matrix switcher via the serial connector.
Installation and Setup Guide
Glossary