Setup guide

Contents
Welcome
Installer’s Product Notes ........................................ii
Meet the Manual...............................................iii
Terms to Know ................................................iv
Technical Support..............................................vi
Chapter 1 — Unpacking the Modula
Front of the Enclosure ........................................1-2
CP-20MD Control Panel ..................................1-3
CP-10MD Control Panel ..................................1-4
Rear of the Enclosure ........................................1-6
Software Version.............................................1-8
Chapter 2 — Placing the Enclosure(s)
Site Recommendations .......................................2-1
General Hazard Precautions ..............................2-1
Installation Procedure ........................................2-3
Chapter 3 — Linking Enclosures
Chapter 4 — Attaching Inputs and Outputs
Chapter 5 — Attaching an External Controller
Chapter 6 — Applying Power and the Startup Sequence
Applying Power ..............................................6-2
Startup from the CP-20MD Control Panel......................6-2
Startup from the CP-10MD Control Panel ......................6-2
Startup from a Serial Control Device ...........................6-3
Installation and Setup Guide