Setup guide

Adding Hardware

You can add input and output boards, vertical interval sync boards, and

enclosures to expand your system’s capabilities. Input and output boards

increase an enclosure’s possible signal routings. A vertical interval sync

board synchronizes video signal switches with the output device’s

refresh rate. Adding enclosures increases the entire system’s switching

capabilities.

When you add hardware to a Modula, you must update the system’s

configuration information by downloading a new configuration file. A

new configuration file, link cables, and other system products are

provided with the new hardware.

This chapter covers:

Adding Boards

Adding Enclosures

Installation and Setup Guide 10-1

Hardware