Setup guide

To modify presets:

1. In the Manage Local Presets dialog box, click the Modify Preset

button.

The Modify Preset dialog box opens.

2. Select any of the following field or button options.

3. When done, click OK to return to the Manage Local Presets dialog

box.

Name (modify preset name) by typing a new name (eight character

limit) in the Name edit field that is not an existing preset name.

Assign Switch by selecting one available source channel and one or

more available destination channels (multiple select by holding

down the control key).

Click the Assign Switch button.

The assignment will appear in the Assignment column of the

Destination Channels list.

Clear Source by selecting a source channel that you want to clear.

Click the Clear Source button.

All instances of the selected source will be cleared from the

Assignment column of the Destination Channels list.

Clear Destination by selecting a destination channel(s) (multiple

select by holding down the control key) that you want to clear.

Click the Clear Destination button.

The Source Channel(s) assigned to the destination(s) will be cleared

from the Assignment column in the Destination Channels list.

Disconnect by selecting either a source channel or one or more

destination channels to be disconnected.

Click the Disconnect button.

Current source and destination disconnects are displayed in the

Disconnected Channels list on their respective sides of the Modify

Preset dialog box.

Caution: Disconnecting an input affects all outputs that the input is

connected to whether they are part of this preset or not.

Note: During a source disconnect, all previous assignments for that

source are cleared from the Assignment column of the Destination

Channels list.

Installation and Setup Guide 9-9

Configuring Local Presets

Configuration Files