Setup guide

8.1 Adjusting Volume Using
the CP-20MD Control Panel
Volume adjustment screens can be accessed from the CP-20MD Control
Panel. The Adjust Volume screen displays the volume range available
for the specific audio output board that has been selected for adjustment.
This command will adjust all components in the specified level that
support volume adjust.
The example following adjusts the Volume for Destination (output)
18: Rm 9 Main Projector.
You can return to the Main Menu screen at any time by choosing the
Main Menu command.
To adjust the Volume from the CP-20MD Control Panel:
1. At the Main Menu screen, choose the Adjust Audio command.
The Audio Destination screen appears, displaying the current
destination options.
8-2 Installation and Setup Guide
Adjusting and Checking Volume
www.autopatch.com
Change
Adjust
Audio
Status
Macro
System
Setup
AUDIO DESTINATION
Level
Main
Menu
21 : VCR #5 Science Lab
Destination
14: Security Monitor
15: Left Monitor Rm B
16: Rt Monitor Rm B
17: Rm 8 Main Projector
18: Rm 9 Main Projector
19: Codec Mtg Rm D
20: VCR #4 Auditorium
21 : VCR #5 Science Lab
Level=0: Building 1
Volume Control