Setup guide

Attaching
Inputs and Outputs
Inputs and outputs attach to the input and output connectors on the rear
of each enclosure. Inputs attach to the connectors on the left side of the
enclosure, and outputs attach to the connectors on the right side. The
input and output connector boards are numbered individually. The four
connector numbers for each board are above and to the right of its top
connector. This pattern continues on each board (see graphic below).
Installation and Setup Guide 4-1
Inputs & Outputs
Numbering starts with the top channel of the left-most
board
Audio inputs
Audio outputs
Video inputs
Video inputs Video outputs