Setup guide

Note: Termination connectors are required on the open ends of all
“T” connectors when linking enclosures.
To link more than two enclosures via the Ethernet connector:
1. Fasten “T” connectors to the Ethernet ports on all the enclosures.
2. Fasten a connector on the first Ethernet link cable onto the “T”
connector on the first enclosure.
3. Fasten the connector on other end of the first Ethernet link cable onto
the “T” connector on the second enclosure, repeating as necessary
for additional enclosures.
4. Add termination connectors on the open ends of the “T” connectors
on the first and last enclosure.
3-4 Installation and Setup Guide
Linking Enclosures
Link more than two enclosures via the Ethernet link port
Terminating
Connectors
Linking