Setup guide

Expansion/Control Slots
Each enclosure provides three expansion/control slots. One contains the
CPU board and two are for future boards that will increase functionality
and add new features to your system. One is located to the right of the
power supply and the other two are to the far right.
CPU
The CPU is in one of the expansion/control slots to the right of the output
connectors and has connectors for attaching external control devices. The
CPU also has a system status indicator, an ethernet use indicator, and
ports for linking to other enclosures.
Power Supply
The power supply is in the farthest left slot on the rear of the enclosure. It
contains a fuse, power switch, and power connector. Press the “0” side of
the toggle switch to turn it off; press the “1” side to turn it on.
Caution: Double Pole/Neutral Fusing–fuses are used both in the “live”
phase and “neutral” phase of the device.
Installation and Setup Guide 1-7
Rear of the Enclosure
CPU board
System Status Indicator
Ethernet Status Indicator
X Net Communication Link Port
Serial Ports
Ethernet Port
Expansion/Control Slots (one with CPU Board)
Unpacking
Power Supply
Fuse
Power Switch
Power Connector