Setup guide

Control Dial: Scrolls vertically through lists and moves sliders for
adjustments (depending on the need and the screen). Press to enter final
selections.
To interact with the Modula Distribution Matrix, use the dynamic
menu keys and the Control Dial to choose commands and values from
the dynamic menu area on the LCD. Each menu key lines up with a
different section of the dynamic menu area (see the graphic on page 1-3).
To choose a command, push the key that corresponds with the one you
want to choose.
To select values for fields (such as Level, Source, Destination, and
Macro values), use a combination of the dynamic menu keys and the
Control Dial. You can adjust the value by using the Control Dial to scroll
to your final value selection.
CP-10MD Control Panel
A CP-10MD Control Panel has 29 keys – 10 number keys for entering
digits, 4 directional arrow keys, and 1 each of the following: Cancel,
Take, Status, Level, Change, Input, Output, Preset, Program, Backlight,
Space, Special, Undo, Comma, and Period (the last four are not
implemented).
1-4 Installation and Setup Guide
Unpacking the Modula
Unpacking
0
SPECIAL
PRESET
PROGRAM
BACKLIGHT
UNDO
TAKE
CANCE L
SPACE
1
2
3
6
54
7
8
9
INPUT
OUTPUT
STATUS
LEVEL
CHANGE
Front view of a Modula enclosure with a CP-10MD Control Panel