Setup guide

Input and Output Connectors
Input and output connectors are on the rear of an enclosure. Input and
output signal cables attach to the input and output connectors. Modula
audio connectors are 3-position terminal block; video and sync
connectors are BNC.
Level
A level is a set of input and output signals that are grouped and,
therefore, switch together. In a configuration file, a level is referred to as
a “virtual matrix.”
Signal
A signal can be analog audio, analog video, serial digital, sync
information, or other types. A signal (also called an input or output
signal) comprises a set of connectors whose signals switch together, such
as an “RGB” signal. Signals are defined inside virtual matrix definitions
(levels) in the configuration file. Input and output signals must share a
common level and share the same signal type for switches to occur
between them.
Switch
A switch is an active connection between an input (source) signal and
one or more output (destination) devices.
X
N
Connect
X
N
Connect is graphical software program that can display your most
recent configuration and allows easy addition of local presets and
modification of other configuration information (see the X
N
Connect Help
file for assistance).
X
N
Net
X
N
Net is an internal communication protocol that requires software
driver support for Ethernet and Neuron
®
interfaces.
Installation and Setup Guide v
Terms to Know
Welcome