Specifications

IMPORTANT! Do not addjust
items 5, 6, 7, 8, and 9. These
controls are factory set .
Power light. Glows RED to indicate that power has been applied to
the unit.
Play light. Glows GREEN while a message is being played.
Record light. Glows YELLOW while a message is being recorded.
Busy light. Glows RED while the unit is active, recording or playing
a message.
Input Level control. Adjusts the volume of the audio input.
DTMF Level control. Adjusts the sensitivity of the DTMF decoder
circuit.
VOX Level control. Adjusts the sensitivity of the Voice detection
circuit.
Power Output control. Controls the volume of the Low impedance
(8) audio output.
Line Output control. Controls the volume of the Line level (600 )
audio output.
Interface connector. Male 50-pin Amphenol connector; accepts
RC2 Pro Interface. Provides all connections to the Digital Feedback
Eliminator, including power, audio, and control inputs and outputs.
Option switches. Two blocks of DIP switches, located under a
plastic cover. Used to select recording length, activation method
(voice, DTMF, or contact closure), page alert tone, and other options.
Overview
1-7