Operating instructions

Turning the power on/off
Power on
Press M
N for about 1 second.
Power off
Press M
N for about 2 seconds.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing
, # and then the
corresponding code on the dial keypad
(page 24).
Example: Press
#101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Display language
1
#110
2 MbN: Select your desired language. a
3 M N
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press , then
proceed to step 2.
1
#101
2 Enter the current date, month, and year.
a
Example: 15 July, 2012
15 07 12
3 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing .
4 a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Smart function key (Top
Key)
The smart function key (Top Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 18, 41)
– Stop the alarm sound. (page 29)
– Stop paging. (page 41)
n When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages.
*1
(page 37)
– View the caller list when there are
missed calls. (page 34)
To activate these features, their Top key
setup must be “On”. (page 16)
*1 KX-TG6721 series: page 3
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press MSmart functionN.
R The above features can be activated
depending the situation.
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1
without lifting up the handset. If
you want to perform further operations, lift
up the handset.
15
Getting Started
TG6711_21NZ(en)_0216_ver011.pdf 15 2012/02/17 15:48:56