Owner's manual

C3 RS915 REV. O1
13
ADVANCED USER’S MODE:
C. LCD REMOTE CONTROL TRANSCEIVER OPERATION:
Enter: Press and hold F Button until beep sound respond from LCD transceiver indicate into
table 1 – 5 as below.
Exit: Press the , or button to exit this mode.
Table 1: ONE beep to confirm (Press and hold until ONE Beep is heard)
F Button
LCD Display
Button
Press once
Backlight turns on for 5 seconds
Press twice within 5
seconds
PASS and
PASS icon flashing
Press button to arm the alarm
and bypass the sensor 1.
Press three times
within 5 seconds
HIDDEN ALARM and
icon flashing
Press button to arm system
and with Hidden Alarm Function.
Press four times
within 5 seconds
CAR JACK and
icon flashing
Ignition in "on" position press and
hold button for 2 seconds to
activate anti carjacking functions.
Table 2: TWO beeps to confirm (Press and hold until TWO Beeps are heard)
F Button
LCD display
Button
Press and hold the F
Button for 2 second
until 2 beeps sounded
MENU flashing
Press button to enter the menu
mode
Press one more time
within 5 seconds
CH 4 flashing
Press button to activate channel
4 function
Press twice within 5
seconds
CH 5 flashing
Press button to activate channel
5 function
Press three time within
5 seconds
CH 6 flashing
Press button to activate channel
6 function
Table 3:THREE beeps to confirm(Press and hold until THREE Beeps are heard)
F Button
LCD display
Button
Press and hold the F
Button for 3 second
until 3 beeps sounded
STATUS and
icon flashing
Press button to check the
Vehicle Status.
Press ONE more time
within 5 seconds
ALARM and
Press button to check the
system trigger condition.
Press TWO more
times within 5 seconds
Voltage and
Check icon flashing
Press button to check the
Vehicle Battery condition.
Press THREE more
TEMP and
Press button to check the Interior