Safety Information

Report No.: TB-EMC162281
Page: 5 of 25
TB-RF-075-1.0
1.3. Description of Operating Mode
To investigate the maximum EMI emission characteristics generated from EUT, the test
system was pre-scanning tested based on the consideration of following EUT operation
mode or test configuration mode which possible have effect on EMI emission level. Each
of these EUT operation mode(s) or test configuration mode(s) mentioned above was
evaluated respectively.
Pretest Mode
Description
Mode 1
Normal Mode
The EUT system operated these modes were found to be the worst case during the
pre-scanning test as Following:
For EMI Test
Final Test Mode
Description
Mode 1
Normal Mode
For EMS Test
Final Test Mode
Description
Mode 1
Normal Mode
1.4. Block Diagram Showing The Configuration of System Tested
EUT
DC Power