User Guide

Charging your KaiBot
When you first unbox your KaiBot, it will have some fuel in its tank. However, we recommend to fully
charge KaiBot first before you start using it. There are two different ways of charging the robot:
a.) via a USB cable that comes with KaiBot or
b.) using the optional add-on KaiBots Autonomous Charging Dock.
Charging with a USB cable (included)
1. Switch off KaiBot
2. Plug in the Micro-USB cable into the micro-usb charging port on the back of KaiBot, next to the
yellow power switch.
3. Once it begins charging the lights will flash green and when it’s fully charged it will show 100%.
Unplug the cable once fully charged. Overcharging KaiBot can damage the battery.
Charging with KaiBots Autonomous Charging Dock (optional)
1. Snap the charging dock tile to the dock and connect the magnetic USB
cable to the left-hand side of the dock.
2. Switch on KaiBot & simply place him onto the purple charge tile any
way you like. KaiBot is super smart and can drive itself onto the
charging dock without any help, no matter how you place it.
3. Once charging begins, the lights will flash green and when it’s fully
charged, it will drive itself off and flash purple.
If KaiBot is completely flat , switch him off and plug him into the
included Micro USB cable.
KaiBot can also be charged when switched off. Again push him onto
the dock and he’ll switch on and start charging or use the included
charging cable.
22