Instruction Manual

󹮷󹮰󹮷
Cylindrical Inductive Long-Distance
Proximity Sensors
PRD Series (IO-Link)
INSTRUCTION MANUAL
TCD210174AD
Thank you for choosing our Autonics product.
Read and understand the instruction manual and manual thoroughly before
using the product.
For your safety, read and follow the below safety considerations before using.
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
󹃔
󹃔


Safety Considerations
• ion to avoid hazards.
• dicates caution due to special circumstances in which hazards may occur.


01. Fail-safe device must be installed when using the unit with machinery that
may cause serious injury or substantial economic loss.(e.g. nuclear power
control, medical equipment, ships, vehicles, railways, aircraft, combustion
apparatus, safety equipment, crime/disaster prevention devices, etc.)
󹃔
02. 󹃖
high humidity, direct sunlight, radiant heat, vibration, impact or salinity
may be present.
󹃔
03. Do not disassemble or modify the unit.
󹃔
04. Do not connect, repair, or inspect the unit while connected to a power
source.
󹃔
05. Check ‘Connections’ before wiring.
󹃔


01. 󹃕
󹃔
02. Use a dry cloth to clean the unit, and do not use water or organic solvent.
󹃔
03. Do not supply power without load.
󹃔
Cautions during Use
󹮰 󹮰󹮰󹮰󹮳󹮰󹮰󹮳󹮸󹮰
󹮶󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮷󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮹󹮰󹮰󹮰
󹮶󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮶󹮰󹮰󹮸󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰
󹮰󹮰󹮰󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮴󹮶󹮰󹮸󹮵󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮴󹮶󹮰󹮰󹮶󹮰󹮸󹮵󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮷󹮰󹮰󹮴󹮰󹮰󹮰󹮵
󹮷󹮰󹮰󹮸󹮰󹮶󹮰󹮰󹮰
󹮷󹮰󹮰󹮰
󹮷󹮰󹮰󹮰
Software
󹃔
 atIOLink

󹃔󹃔
• 
󹃔

󹃔
communication data according to the user interface.
󹃔
Communication Interface
 IO-Link
Version 
Class Class A
Baud rate 
Min. cycle time 
Data length 
Vendor ID 
Cautions for Installation
• 
󹃔
• 
cause damage the water resistance.
• 

󹃔
• 


Product Components
• 
• 
• 
• 
Sold Separately
• 

• Transmission coupler
• Spatter protection cover
• 
Ordering Information

󹃔
PRD   -  D -  - IL2










Oil resistant
Circuits
   
+L I/Q

 C/Q

 󹮹
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸



CIRCUIT
󹮷󹮰
1
4
3
 SIO mode
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮺󹮰󹮰󹮸󹮰󹮹󹮰󹮰󹮸󹮸
󹮰  󹮰 






CIRCUIT
󹮰󹮷󹮰󹮰
󹮸󹮸
󹮸󹮸




󹮸󹮸
󹮸󹮸


CIRCUIT
󹮰󹮷󹮰󹮰
Functions
 󹮹
󹮰 󹮷󹮰󹮰󹮰󹮰
󹮴󹮰󹮰󹮰󹮰󹮰󹮰󹮷󹮰󹮵
󹮰 󹮰󹮰󹮴󹮰󹮰󹮴󹮰󹮵󹮰󹮹󹮰󹮰󹮰󹮹󹮰󹮰󹮰󹮹󹮰󹮰󹮵
󹮰 󹮰󹮰󹮴󹮰󹮰󹮰󹮵󹮰
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰 󹮰󹮰󹮴󹮷󹮰󹮹󹮰󹮰󹮹󹮰󹮵
󹮰 󹮰󹮰󹮴󹮸󹮸󹮰󹮴󹮰󹮵󹮰󹮹󹮰󹮸󹮸󹮰󹮴󹮰󹮵󹮵
󹮰 󹮰󹮰
 Monitoring functions
󹮰 󹮰
󹮰 󹮰󹮰
󹮰 󹮰󹮰
󹮰 󹮰󹮰
󹮰 󹮰󹮰󹮰
󹮰 󹮰󹮰
󹃕
󹮰 󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮸
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮸󹮰󹮴󹮸󹮰󹮰󹮸󹮰󹮰󹮵
󹮰 󹮰󹮰󹮰󹮰󹮰󹮰󹮸
2
3
1
4
   
+L I/Q

 C/Q

󹃕
Installation Flush type
Model   
DIA. of sensing
side
  
Sensing distance
 7 mm 
Setting distance
  
Hysteresis

Standard
sensing target:
iron
  
Response
frequency
01)
  
󹃔
temperature

Indicator
󹮷


󹃕
󹃕
SIO mode

󹃕
Approval 󹮰󹮰 󹮰󹮰 󹮰󹮰


󹮰󹮵󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮸
󹮰󹮰󹮰󹮷󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮸
Power supply
󹮰󹮷󹮰󹮰󹮰󹮴󹮰󹮷󹮺󹮰󹮰󹮰󹮵󹮶󹮰󹮰󹮺󹮰󹮰󹮷󹮰󹮰
Current
consumption
󹮷󹮰󹮺󹮰󹮰󹮰󹮶󹮰󹮰󹮺󹮰󹮰󹮰
Control output 
Residual
voltage
01)

Protection circuit

polarity protection
Insulation
resistance

Dielectric
strength

Vibration

direction for 2 hours
Shock

Ambient temp.
02)

Ambient humi.

Protection rating 
Connection 
Cable spec.
03)


 
Connector spec. M12 plug connector
Material




󹮰󹮵󹮰󹮰󹮰󹮰󹮰󹮰

Installation 󹃖
Model   
DIA. of sensing
side
  
Sensing distance
  
Setting distance
  
Hysteresis

Standard sensing
target: iron
  
Response
frequency
01)
  
󹃔
temperature

Indicator
󹮷


󹃕
󹃕
SIO mode

󹃕
Approval 󹮰󹮰 󹮰󹮰 󹮰󹮰


󹮰󹮵󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰
󹮰󹮸
󹮰󹮰󹮰󹮷󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮸
󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰󹮴󹮵󹮰󹮰󹮶󹮰󹮰󹮰󹮰󹮰
󹮰󹮰󹮸
Unit weight
(package)
Ø 12 mm  Ø 30 mm
Cable   
Cable connector   
Connector   