User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
A
utonet Mobile Software License (continued)
Other Open Source Software
A
utonet Mobile CarFi is provided with the following software licensed under bsd licenses or
other open source software licenses. The software and license details are available from the
referenced web-sites.
34
nginx from http://wiki.nginx.org/
openssh from the openbsd project (http://www.openssh.com
)
madwifi from http://madwifi.org/
WPA supplicant from http://hostap.epitest.fi/wpa_supplicant/
hostapd from http://hostap.epitest.fi/hostapd/
ushare from http://ushare.geexbox.org/
mt-daapd from http://www.fireflymediaserver.org
bluez from http://www.bluez.org/
aufs from http://aufs.sourceforge.net/
php from http://www.php.net