User's Manual

Important Safety Information (continued)
Blasting Areas
To avoid interfering with any blasting operations, turn CarFi off when in any “blasting area” or
in any area posted: “turn off two-way radio.” Obey all signs and instructions.
Potentially Explosive Atmospheres
Turn CarFi off when in any area with a potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an explosion or fire and result in bodily
injury or death.
A
reas with a potentially explosive atmosphere are often, but not always, clearly marked. They
Include fueling areas, like a gasoline/petrol station, fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum gas (such as propane and butane); areas where
the air contains chemicals or particles, such as grain, dust, or metal powders; and any other
area where you would normally be advised to turn off your vehicle engine.
Power Cable/Connections
To prevent damage to yourself or CarFi, take the following precautions:
 To prevent a short circuit when replacing a fuse, first turn off the ignition and
disconnect the wiring harness. When replacing a fuse, only use an Autonet
approved fuse. Any fuse less than the approved rating may cause damage to
CarFi.
 Unplug the power cable/connections during any lightning storms to avoid electrical
shock or fire.
 Make sure the car ignition is turned off before attempting to remove or modify any
power cable/connections.
 Keep the minimum required amount of space between the power
cable/connections and any heat sources.
 Do not allow the power cable/connections to be walked on, pinched, twisted or
pulled which could cause damage.
 Do not use CarFi if any power cable/connections are damaged which could cause
fire or electrical shock.
25