User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
21
Care and maintenance of CarFi
A
lthough designed specifically for the stringent environment of an
A
utomobile, CarFi must be handled similar to any typical
electronic device. Follow these guidelines in using and maintaining
your device:
If CarFi becomes excessively dirty, turn off the ignition
power, remove CarFi unit from the docking station and wipe
the enclosure with a dry silicone cloth or soft cloth.
Do not spray the enclosure with any household cleaners
or liquids of any kind.
Do not wipe CarFi with a hard cloth or a cloth dampened by
volatile solvents such as paint thinners or alcohol.
To prevent the battery from draining please refrain from
leaving the key in the ACC on position for any extended
amount of time.