User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
Technical Specifications of Autonet’s CarFi
Led status overview-General usage
Status LED (Blue) Indicates
LED not lit CarFi is not connected to power, or has been
recently turned on (Please note: Blue LED
does turn off for approximately 15 seconds at
startup)
LED slow blink CarFi is in sleep mode (if there are no Wi-Fi
users connected to it, the unit will go into
sleep mode and automatically reconnect once
a device is attached)
LED fast blink CarFi is acquiring the cellular network (after
waking up from sleep mode)
LED solid
CarFi is connected
Led status overview-initialization sequence (at power on)
Status LED (Blue) Indicates
LED not lit (20-30 seconds)
CarFi has been powered on
LED in medium blink mode (20-30 seconds)
CarFi is in initialization mode
LED fast blink (20-30 seconds) CarFi is acquiring the cellular network
LED solid CarFi is connected to the cellular network
CDMA/EVDO Specifications
CDMA/EVDO specification CDMA Rev. A, Rev 0, 1XRTT
Band Designation 800/1900 Mhz
Transmit Band
824.7 – 848.31MHz/
1851.25 – 1908.75MHz
Receive Band
869.7 – 893.31MHz/
1931.25 – 1988.75MHz
16