User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
Service Information
Turn off your vehicle ignition; disconnect CarFi or any other Autonet Mobile accessories
and, if necessary, refer the issue to qualified service personnel or call Autonet Customer
Service Center if:
The main unit, docking station, power cable/connection or connector to
your CarFi is damaged.
Liquid has spilled or objects have fallen into your CarFi or Autonet
Mobile accessories.
Your CarFi or other Autonet Mobile accessories become excessively
hot to the touch.
Your CarFi or other Autonet Mobile accessories have been exposed to rain or
water.
Your CarFi or other Autonet Mobile accessories have been dropped or
damaged in any way.
Your CarFi or other Autonet Mobile accessories do not appear to operate
normally in accordance with the instructions contained in any guide provided
by Autonet Mobile Inc.
Your CarFi or other Autonet Mobile accessories exhibit a distinct change in
performance.
A
ll servicing of CarFi or other Autonet accessories should be performed
by qualified personnel. Do not attempt to disassemble, modify, or repair
A
utonet’s CarFi or any other Autonet accessories yourself
.
If you have any quesons or problems, please call the Autonet
Mobile Customer support center phone line: 1-800-977-2107
15