User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
Troubleshooting Guide (cont.)
If you have any quesons or problems, please call the Autonet
Mobile Customer support center phone line: 1-800-977-2107
Problem/Error
Solution
Wireless configuration issues (Autonet-
XXXX does not appear in your wireless
networks window)
Disable and then re-enable your
wireless interface.
Refresh your available wireless
networks window.
Disconnect CarFi from your wireless
network and reconnect.
Consult the configuration instructions
provided by your Wi-Fi device
manufacturer.
If Autonet-XXXX still does not appear in this
list, call our customer support center for further
troubleshooting.
Forgotten password
Please call are customer support center to
reset password
14