User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
Configuring Wireless Settings
Click on “Wireless Settings”
The wireless settings default
page will look similar to the right
7
Setting ESSID
The ESSID is the identifying name of a wireless network - strictly it is the identifying name of
a wireless access point. It allows one wireless network to be clearly distinguishable from
another. The default ESSID is autonet-xxxx, where xxxx is the last 4 digits of CarFi’s serial
number. Although this can be modified, it is recommended that you keep this ESSID as the
default to distinguish CarFi from other hotspots in the same vicinity. Please note that if you
change this name, you may need to reset your networks list/connection on your web
accessible device.