User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
6
Configuring CarFi
It is highly recommended to enable “encryption type/key security” and
change the default password for CarFi
Configuring CarFi’s settings
Step 1
Locate CarFi’s ten digit serial number located on the back side of CarFi, or in front of the
User’s guide included in the package. (If you have trouble locating the serial number of the
CarFi, please call our customer support line at 1-800-977-2107 for assistance)
Step 2:
Open a web browser and go to: http://www.autonetrouter.com/admin
Login with username “autonet” and use CarFi’s serial number as the password (e.g.
0024C76258). Click on the login button. Please note that all Alpha characters must be
capitalized.