User's Manual
Table Of Contents
- 186_1100_001_04
- 1. PURPOSE
- The purpose of this document is to provide specifications for the CarFi User’s guide for the Stewart Autonet branded router.
- 2. SCOPE
- This document applies to the fabrication and assembly of the Stewart CarFi User’s guide.
- 3. RESPONSIBILITIES
- It is the responsibility of contract manufacturer/packaging supplier to follow this document, or create an approved internal document.
- 4. DEFINITIONS
- 5. APPLICABLE DOCUMENTS
- 6. DIMENSIONS
- 7. MATERIALS/PROCESS
- 8. TESTING
- 9. REVISION SYNOPSIS
- 10. Approvals
- 186_1100_001_04_pg_22
- 186_1100_001_04
Step 4
Happy Surfing!
(Please note: You must complete an Autonet service agreement in
order to activate CarFi. The Autonet service agreement can be
found at: https://www.autonetmobile.com/signup
5
Quickstart Guide
Step 1
Turn your car to the Acc position to power up Autonet Mobile’s
CarFi.
Step 2
Open your wireless network list and connect to “autonet-XXXX”.
(The last 4 digits will be the same as your last 4 digits of CarFi
serial number).
Step 3
Open your web browser.
Click on the login button.