User's Instructions

1/2
ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Strasse 10 | 88131Lindau | Germany
Phone [phone] | Fax [phone] | www.continental-corporation.com
Managing Directors: Karlheinz Haupt, Uwe Grau
Registered Office: Lindau | Registered Court: Kempten | HRB No. 6408 | VAT ID No.: DE812185464 | Tax No. 127 121 20175
Bank Account: Deutsche Bank | Ravensburg | BIC / SWIFT Code: DEUTDESS650 | NBIC: 650 700 84 | Account No.: 34 000 82 00 |
IBAN Code DE90 6507 0084 0340 0082 00
2018-11-30
Certification for Continental SRR5-B
Model / FCC ID: OAYSRR5B
IC: 4135A-SRR5B
PMN: SRR520
The device under test is manufactured by the grantee (ADC Automotive
Distance Control Systems GmbH) and sold as an OEM product. Per CFR 47
Part 95 Subpart M, the grantee must ensure that the end-user has all applicable /
appropriate operating instructions. When end-user instructions are required, as is
the case with this product, the grantee must notify the OEM to notify the end-
user.
ADC Automotive Distance Control Systems GmbH will supply the following
information to the reseller/distributor dictating what must be included in the end
user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product
user’s manual to ensure continued FCC and Industry Canada regulatory
compliance. The ID numbers must be included in the manual if the device
label is not readily accessible to the end user. The compliance paragraphs
(in blue) below must be included in the user's manual.
Chassis & Safety
ADC GmbH – Peter-Dornier-Strasse 10 – 88131 Lindau
To the
Federal Communications Commission (FCC)