User's Manual

SRR2-A / BSM Users Manual

C PSAD A D F6

Filename: SRR2-A Exhibit 1 - User_Manual_V11.doc

Issue status: 1.1 Document maturity: released

Department: C PSAD A D F6

page

8 of 13



 by Continental 2010

5 SRR2-A sensor component description

The SRR2-A sensor consists of the following components:

• Plastic housing with sensor CAN connector and sealing

• RF antenna board which is plugged into the housing

• EMC shield to protect the RF board from digital noise of the ECU board

• An aluminum back cover closes the sensor and serves as a mounting area for the sensor

to be mounted to the car. Typical mounting angle is 20°C with respect to the driving direction.

Figure 2: SRR2-A sensor drawing

Housing

RF Antenna

EMC Shield

ECU board

Back Cover