Manualshelf

Service manual

ManualsBrandsAutomotive Data Solutions ManualsCar alarmBLADE-DL-VW1-EN Blade Series
61626364656667686970
Calibrating the printer at the control panel
Use the following steps to calibrate the printer using the printer control panel.
1.
Use the
(Left arrow) or the
(Right arrow) button to select SYSTEM SETUP and then press
(Select).
2.
Use the
(Left arrow) or the (Right arrow) button to select PRINT QUALITY and then press
(Select). CALIBRATE COLOR will display on the control panel.
3.
Press
(Select).
4.
Use the
(Left arrow) or the (Right arrow) button to select CALIBRATE NOW and then
press
(Select).
5.
Press
(Select) to start the calibration.
58 Chapter 4 Operational theory ENWW