Service manual
Tray 1 and Tray 2
Dimensions
1
Weight Capacity
2
HP LaserJet glossy paper
and HP LaserJet photo paper
Same as the preceding
listed minimum and
maximum sizes.
75 to 163 g/m
2
(20 to 43 lb)
Single sheet of HP LaserJet
glossy paper or HP LaserJet
photo paper for Tray 1
Up to 25 mm (0.99 inch)
stack height for Tray 2
HP Premium Cover paper
3
200 g/m
2
(75 lb) cover
Single sheet of HP Cover
paper for Tray 1
Up to 25 mm (0.99 inch)
stack height for Tray 2
Transparencies and opaque
film
Thickness: 0.10 to 0.13 mm
(3.9 to 5.1 mils)
Single sheet of transparency
or opaque film for Tray 1
Up to 50 sheets for Tray 2
Labels
Thickness: up to 0.23 mm
(up to 9 mils)
Single sheet of labels for
Tray 1
Up to 25 mm (0.99 inch)
stack height for Tray 2
Envelopes
Up to 90 g/m
2
(16 to 24 lb)
Single envelope for Tray 1
Up to ten envelopes for
Tray 2
1
The printer supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on media weight and thickness, and environmental conditions.
3
Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
Optional Tray 3 specifications
Table 1-6 Optional Tray 3 specifications
Optional Tray 3 (250–sheet
tray)
Dimensions
1
Weight Capacity
2
Paper Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 216 x 356 mm
(8.5 x 14 inches)
60 to 163 g/m
2
(16 to 43 lb)
Up to 250 sheets
1
The printer supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on media weight and thickness, and environmental conditions.
Unsupported media (media to avoid)
Avoid using the following media:
● Paper that has been stapled. Staples left in reused paper will cause printer damage that will
require repairs that may not be covered under the warranty.
● Sheets of labels that have been used more than once or partial sheets of labels
● Labels that are not specifically recommended for laser printers
Table 1-5 Tray 1 and Tray 2 specifications (continued)
ENWW Print-media specifications 17