Service manual

Control panel message Description Recommended action
Door open The printer door is open. The door must be closed before printing
can continue.
Engine comm.
error
The device experienced an internal
communication error.
This is a warning message only. Job output
might be affected.
Invalid driver You are using the incorrect printer driver. Reselect the printer driver appropriate for
your device.
Invalid entry Invalid data or response. Correct the entry.
Jam in
Cartridge area
A paper jam has occurred in the print path. Open the door and clear the jam. Then
press the
(Select) button on the control
panel.
Jam in
Output bin
A paper jam has occurred in the output area.
Clear the jam, and then press the
(Select) button on the control panel.
Jam in
print paper path
A paper jam has occurred in the print path. Open the door and clear the jam. Then
press the
(Select) button on the control
panel.
Jam in
tray 2
A paper jam has occurred in Tray 2.
Clear the jam, and then press the
(Select) button on the control panel.
Jam in
tray 3
A paper jam has occurred in Tray 3.
Clear the jam, and then press the
(Select) button on the control panel.
Load paper The HP Color LaserJet 1600 printer is out
of paper.
Please load specified paper type into the
tray indicated.
Load Tray X
[TYPE] [SIZE]
The printer is processing job, but the tray
indicated is empty.
Please load specified paper type and size
into the tray indicated.
Manual feed
Press
The printer is waiting for paper in the tray
indicated.
Load the paper as indicated.
Memory is low
Press
The device memory has been almost
completely filled.
Allow the device to finish the job, or press
(Select) to cancel the job.
Break the job into smaller jobs that contain
fewer pages.
Misprint
Press
The printed pages have been incorrectly
placed on the paper.
To continue, press the (Select) button
on the control panel.
No paper pickup
Press
The print engine has failed to pick up a
piece of media.
In Tray 1, verify that the media was inserted
far enough into the tray. In Tray 2 or
optional Tray 3, verify that the paper-length
guide is in the correct position for the media
size that you are using.
Reload the media in the input tray and
press
(Select) to continue the job.
Unexpected size Unexpected paper size error. The media
size loaded in the tray does not match the
media size configured for the tray.
Verify that the print settings are set to the
specified media in the tray.
134 Chapter 6 Troubleshooting ENWW