Service manual

Restoring page counts and serial number

A software utility is available on the Service and Support CD-ROM to restore page counts and serial

numbers when the formatter is replaced or when any of the following settings are lost:

● Color page count

● Total page count

●

Formatter number

●

Service ID

● USB serial number

To access the utility on the Service and Support CD-ROM, in the Library folder, double-click the

1600config.exe program. You can run the utility from the CD-ROM or copy it to your computer.

NOTE To use this program, the printer must be directly connected to your computer with a

USB cable.

Cleaning the ETB

To clean the ETB, use the following procedure:

1. Enter the Secondary service menu. For more information, see

Secondary service menu

on page 120.

2. Scroll through the menu and select Clean ETB.

Press the

(Select) button to start the cleaning mode.

ENWW Service mode functions (service only) 129