User manual

Source Select
This parameter allows the user to select the input source for the zone.
Priority Select
This parameter allows the user to select which input will override the primary source signal..
Priority Level -Inf to 20dB
Adjusts the output level of the selected Priority input signal.
Page Select
This parameter allows the user to select which Paging input will override the source signal.
Page Level -Inf to 20dB
Adjusts the output level of the selected Paging input signal.
Master Level -Inf to 20dB
This parameter adjusts the output level of of the Zone.
Master mute
When selected, the the signal will be muted for the Zone.
Both the Router and Mixer provide Ducking capability along with selection of a priority and
paging source. The Priority Ducker attenuates the primary source and adds the Priority source.
The Priority source is also gated using the same timing as the Priority Ducker. When the Priority
source crosses the Priority
Ducker Threshold the Ducker attenuates the Primary source by the Depth amount. At the same
time the Priority Gate opens to allow the Priority source to be summed over the primary source.
The Gate depth is –INF when closed to prevent adding noise to the primary source.
The Page Ducker attenuates both the primary source and the Priority source if present. A Page
source Gate can be added using the Mic/Line Insert 1 or 2.
Detailed Parameters
Section 4
ZonePRO
™
ZonePRO
™
User Manual
29